Connect Serial Printer Or Pc; Figure 54 Connect Serial Cable To Com3 - LXE VX7 User Manual

Connect Serial Printer or PC

Connect Serial Printer or PC
Pin 9 of COM3 (labeled "COM2/3") is configured to provide RI. To change Pin 9 the port,
please refer to the "VX7 Reference Guide".
The printer or PC cable requires a nine-pin D-shell female connector for the VX7.
The printer or PC cable is attached to the connector labeled "COM2/3".
Note:
1.
2.
3.
4.
E-EQ-VX7OGWW-H
Refer to the documentation received with the printer or PC for complete
instructions.
Use of a shielded cable is required to maintain FCC and CISPR22 emissions
compliance.
IP66
U L
LISTED
I.T.E. C US
®
REFER TO
MANUAL E-130794
N107
PRODUCT OF U.S.A. U.S. PATENT 5862393
COM1 / SCANNER COM2/3

Figure 54 Connect Serial Cable to COM3

Power off the VX7 before connecting the cable to the VX7.
Seat the connector firmly over the pins and turn the thumbscrews in a clockwise
direction. Do not overtighten.
Use a strain relief clamp to secure the cable.
Press the power button to power up the VX7.
CAUTION: For continues protection against risk of fire,
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
replace only with same type and rating of fuse.
OPERATION IS SUBJECT TO THE FOLLOWING TWO This Class A digital apparatus complies with
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL Canadian ICE-003.
ATTENTION: Pour ne pas compromette la preotection
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
Cet appareil num érique de la Classe A est
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
contre les risques d'incendie, remplacer par un fusible
confirme l à n orme NMB-003 du Canada
THAT MAY CAUSE UNDESIRED OPERATION.
de mmes types de mmes caractristques nominales. ê
AUDIO
INPUT:
12-80VDC
6A 72W
KEYBOARD / ETHERNET /
MOUSE USB
T10A, 125V
ê é
VX7 User's Guide
61