Description - CyberPower CPS625AVR User Manual

WHAT IS AVR?
These machines provide complete power protection from utility power that is not always consistent.
The CPS625AVR features 600 Joules of surge protection, and provide long lasting battery backup
with a 7.2AH battery for loss of utility power and voltage sags. The CPS625AVR ensures consistent
power to your computer system and include software that will automatically save your open files and
shutdown your computer system during a utility power loss.
AUTOMATIC VOLTAGE
REGULATOR
The CPS625AVR controls utility power
voltage levels that can be inconsistent.
The incoming utility power may be at a
damaging level to important data files, but
with the Automatic Voltage Regulation of
these units, the computer will only experi-
ence a consistent voltage level. An Automatic Voltage Regulator automatically increases low or
decreases high voltage to a consistent, computer safe 110v/120v. The unit's powerful 7.2AH battery
will provide power only if the incoming voltage drops below 92v or increases above 140v.

DESCRIPTION

Battery Back-up and Surge Pro-
tected Outlets
Provides three battery-supplied outlets
with Automatic Voltage Regulation
(AVR) for consistent output power to
connected equipment.
"Always-on" Outlets Provide Maxi-
mum Surge Protection
Provides three surge-protected outlets
to protect connected equipment against
surges and spikes.
Power Switch
Can be used as the master on/off switch
for computer equipment connected to
the battery power supplied outlets.
INSPECTION
The box should contain the following:
(1) PowerPanel™ software (floppy disk); (1) serial interface cable (DB-9); (1) serial-to-USB cable;
(1) telephone communication cable; (1) user manual; (1) warranty registration card; (1) UPS unit.
Guaranteed Uninterruptible Power System
Power On Indicator
This LED is illuminated when the utility condition
is normal and the UPS outlets are providing "clean
power", free of any surges or spikes.
Electrical Wiring Fault Indicator
This LED indicator will illuminate to warn the user
that a wiring problem exists, such as bad ground,
missed ground, or reversed wiring. If this is
illuminated, user is advised to disconnect all
electrical equipment from the outlet and have an
electrician check the outlet to insure proper ground.
Circuit Breaker
Located on the side of the unit, the circuit
breaker serves to provide circuit overload and fault
protection. Under normal conditions, the circuit
breaker is flush with the unit.
Serial Port to PC
The UPS communicates its status through the serial
connection to the PowerPanel™ software. The use
of the software is optional.
Communication Protection Ports
The communication protection ports are
designed to protect standard modem, Fax,
Telephone or network line.
1
CPS625AVR