Adding Codes To The Match List For Ean128 Barcodes - LXE MX3 Reference Manual

108

Adding Codes to the Match List for EAN128 Barcodes

The first elements of an EAN128 barcode are matched against the entries in the Match Code list,
in the order entered in the list. For example, if the match code list contains Item 0 ABC, Item 1 C
and Item 2 AB in that order, the AB has no effect. When a match is found (e.g. Code ID A was
matched by Item 0 ABC and the process terminated) or when the end of the list is reached,
processing terminates.
Up to 20 Codes (up to 16 characters each) can be added to the Match list. The characters can be
text or control characters, e.g. tab, carriage return. The characters can be entered into the Match
Code List text box by typing from the keypad, entering the key's hex equivalent, or entering in hat
( ^ ) encoded delimited (8-bit code table) notation.
• Keys/characters are typed into the lower left text box.
• To add a match code, move the cursor to the lower left text box. Add the characters to the
box and select the Add button to place the new Match Code in the List Box.
• To edit a match code, highlight the match code in the List Box and double-click. The match
code text is moved to the lower left text box. Make changes to the copied match code and
select the Add button.
• To delete a match code, highlight the code in the List Box and select the Remove button.
The match code is deleted from the list.
• After adding, editing or removing match codes, perform the Suspend/Resume function to
store your changes in the registry.
• Hex values can be entered by preceding the two digit hex value with '0x'. Control
characters can also be entered using the 'hat' delimited notation, i.e. ^M for Carriage
Return. See "Hat Encoding" and "Decimal-Hexadecimal Chart" at the end of Chapter 5
"MX3-RFID".
• All keypad keys can be entered by typing the key.
Note:
MX3-RFID Reference Guide
No matching is done for barcodes using this option if they are not EAN128 barcodes.
Control Panel Options
E-EQ-MX3RFIDRG-A