Control Switches - Aston Martin DB9 2006 Manual

Control Switches

(1) Temperature Control Dial - Set the required in
vehicle temperature. Turn clockwise for hot and
anticlockwise for cold. The selected temperature is
displayed on the Infotainment centre screen.
(2) Air Flow Dial - Select the required airflow. The
selected air flow mode is displayed on the Infotainment
centre screen.
(3) Fan Speed Dial - Turn the fan speed dial from 'Off' to
set the required fan speed (clockwise for fast speed and
anticlockwise for low speed). The fan speed is displayed on
the Infotainment centre screen. Rotate to 'Auto' for fully
automatic air conditioning operation.
Warning
Do not select re-circulated air in cold or rainy weather,
it may cause the glass to mist up.
* On LHD vehicles these switches are on the LH side of the
centre stack.
(4) Air Circulation Button* - Controls the source of air
entering the vehicle. Press to select re-circulated air (a lamp
on the button illuminates to indicate that re-circulated air is
selected). Use this position when going through tunnels,
driving in congested traffic (high engine exhaust areas) or
when maximum cooling is required.
On start up the default position is outside air selected. Use
this position for normal conditions and demisting.
(5) A/C Button* - Push the button to turn the air
conditioning on (an indicator lamp on the button will
illuminate when the fan control dial (3) is on). Push the
button again to turn the air conditioning off
Air conditioning may not function when the outside
temperature approaches 0°C (32°F). (Indicator remains on
even when system is off.)
7.3