Detour - Alternate Route - Aston Martin DB9 2006 Manual

Saved Specified Areas
Choose which of the saved areas are to be
avoided in calculating route. These are
marked with a cross. Step using Up / Down
to choose among the areas. Mark or un-mark
using Right / Left.
11.32
OK - Activates areas marked with a cross.
The areas activated are displayed on the map
image.
Cancel - Undoes settings made and returns
to Route options settings.
Specify an Area Address
Select <Address>. Enter the address of the
area to be avoided. The address then
constitutes the centre of the area. Use Up /
Down to move between the rows and press
to enter the address.
Select - The specified area is shown on the
map. Press to obtain the submenu.
Choose <Scale> to specify the size of the
area to be avoided. Select <Set area> to
avoid to save the area. Select <Adjust size>
to change the size of the area or select
<Adjust area> to move the area.
Cancel - Returns to saved areas.
Detour – Alternate Route
When the detour function is used, the system
calculates an alternate route to avoid part of
the calculated route. This is used to avoid
construction, for example.
Press in map view to access the Quick
menus. Move to the Detour Quick menu
using Right / Left.