Dyness PowerDepot H5B User Manual page 26

PowerDepot H5B series User Manual
Master Setting 3
(5) If the battery communicates with the Schneider Conext Series, turn the master DIP
switch "#1" and "#3" to "ON".
Master Setting 4
(6) When you setup the master DIP as setting 1~4, all the slaves keep the DIP 0000, no
need change.
(7) If the energy storage system has only one powerdepot, it is the master itself, and still
follow the above steps.
Note: For more information of matching inverter brands, please subject to the latest
document
<The list of compatibility between Dyness ESS and Inverters >.
Caution
Proceed as follows:
a. Remove the four screws on the cover and open the cover.
b. Find the red DIP switch on the module and confirm the status of the DIP switch.
20