Remote Management; Parental Control - TP-Link TW-MR3220 User Manual

3g/4g wireless n router

Table of Contents

RESET Button on the rear panel for about 5 seconds to reset the Router's factory defaults on

the Router's Web-Based Utility.

4.9.4

Remote Management

Choose menu "Security →

Management function in the screen as shown below. This feature allows you to manage your

Router from a remote location via the Internet.

Web Management Port - Web browser access normally uses the standard HTTP service



port 80. This Router's default remote management web port number is 80. For greater

security, you can change the remote management web port to a custom port by entering

that number in the box provided. Choose a number between 1 and 65534 but do not use

the number of any common service port.

Remote Management IP Address - This is the current address you will use when



accessing your Router from the Internet. This function is disabled when the IP address is

set to the default value of 0.0.0.0. To enable this function change 0.0.0.0 to a valid IP

address. If set to 255.255.255.255, then all the hosts can access the Router from internet.



Note:

To access the Router, you should type your Router's WAN IP address into your browser's

address (in IE) or Location (in Navigator) box, followed by a colon and the custom port

number. For example, if your Router's WAN address is 202.96.12.8, and the port number

used is 8080, please enter http://202.96.12.8:8080 in your browser. Later, you may be

asked for the Router's password. After successfully entering the username and password,

you will be able to access the Router's web-based utility.

Be sure to change the Router's default password to a very secure password.

Choose menu "Parental Control", and you can configure the parental control in the screen as

shown in Figure 4-46. The Parental Control function can be used to control the internet activities

of the child, limit the child to access certain websites and restrict the time of surfing.

TL-MR3220

Remote Management", you can configure the Remote

-54-

3G/4G Wireless N Router User Guide

Table of Contents