Password; System Log - TP-Link TW-MR3220 User Manual

Some settings of the Router will take effect only after rebooting, which include
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Wireless configurations.
• Change the Web Management Port.
• Upgrade the firmware of the Router (system will reboot automatically).
• Restore the Router's settings to factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically.

4.16.7 Password

Choose menu "System Tools → Password", you can change the factory default user name
and password of the Router in the next screen as shown below.
It is strongly recommended that you should change the factory default user name and password
of the Router, because all users who try to access the Router's Web-based utility or Quick
Setup will be prompted for the Router's default user name and password.

Note:
The new user name and password must not exceed 14 characters in length and not include any
spaces. Enter the new Password twice to confirm.
Click the Save button when finished.
Click the Clear All button to clear all.

4.16.8 System Log

Choose menu "System Tools → System Log", you can view the logs of the Router.
TL-MR3220 3G/4G Wireless N Router User Guide
-77-