Table of Contents
Advertisement
Enable Internet Access Control - Select the check box to enable the Internet Access
Control function, so the Default Filter Policy can take effect.
Rule Name - Here displays the name of the rule and this name is unique.
Host - Here displays the host selected in the corresponding rule.
Target - Here displays the target selected in the corresponding rule.
Schedule - Here displays the schedule selected in the corresponding rule.
Modify - Here you can edit or delete an existing rule.
Click the Enable All button to enable all the rules in the list.
Click the Disable All button to disable all the rules in the list.
Click the Delete All button to delete all the entries in the table.
You can change the entry's order as desired. Fore entries are before hind entries. Enter the ID
number in the first box you want to move and another ID number in second box you want to
move to, and then click the Move button to change the entry's order.
Click the Next button to go to the next page, or click the Previous button return to the previous
page.
To add a new rule, please follow the steps below.
1. Click the Add New... button and the next screen will pop-up as shown below.
2. Give a name (e.g. Rule_1) for the rule in the Rule Name field.
3. Select a host from the Host drop-down list or choose "Click Here To Add New Host List".
4. Select a target from the Target drop-sown list or choose "Click Here To Add New Target
List".
5. Select a schedule from the Schedule drop-down list or choose "Click Here To Add New
Schedule".
6. In the Status field, select Enabled or Disabled to enable or disable your entry.
7. Click the Save button.
For example: If you desire to allow the host with MAC address 00-11-22-33-44-AA to access
only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts
www.google.com
in the LAN to access the Internet, you should follow the settings below:
TL-MR3220
3G/4G Wireless N Router User Guide
-58-
Advertisement
Table of Contents
