Ata Loss Mode - Enable "Ack" Beep; Ata Loss Mode - Disable "Ack" Beep; Time - Buffered Data Option - Baracoda RoadRunners Evolution-L Manual

1.4.1.
Erases all captured data stored in memory and forces the scanner in Real time mode. No other setting is
changed.
Important reminder: if an ACK beep or buffer is needed, the scanner must be set in the "no data loss mode"
first.
1.4.2.
Forces the scanner in Real Time mode (with data acknowledgement); Erases all captured data stored in
memory. The scanner should have been previously set in the "No data loss mode" ON (So scan the "Enable Real
Time with No Data Loss mode" barcode before).
1.4.3.
Forces the scanner in Real Time mode (without data acknowledgement); Erases all captured data stored in
memory. The scanner should have been previously set in the "No data loss mode" ON (So scan the "Enable Real
Time with No Data Loss mode" barcode before).
1.4.4.
It's possible to set the scanner in "Real Time with No Data Loss mode" but with no bufferisation (buffer
configured to 0) when it's not connected. In this particular situation the trigger will not activate the beam: so
impossible to read barcodes in this mode, and Both LEDs blinks orange.
RoadRunners Evolution –L (1D) & -LA (Laser) – Programming Guide v1.8
Get user manuals: See SafeManuals.com
Real Time mode
Enable Real Time with « No Data Loss »
Enable Real Time without « No Data
No Data Loss mode - Enable "ACK" beep
Enable ACK beep
No Data Loss mode - Disable "ACK" beep
Disable ACK beep
Real Time - Buffered data option
Max Buffered Barcodes = 0
mode
Loss » mode
Data Capture
for Workforce
in Motion
- 12 -