Operating Mode; Real Time Mode; Real Time Mode With "No Data Loss Mode; Real Time Without "No Data Loss Mode - Baracoda D-Fly Programming Manual

Hide thumbs Also See for D-Fly:

Table of Contents

All manuals and user guides at all-guides.com

1.4. Operating Mode

Real Time mode (standard mode): barcodes are transmitted in real time to the remote host device/terminal

(with optional acknowledgment beep from the host to the scanner).

User can choose if the scanner, when not connected, should read, memorize and later automatically upload the

barcodes or shouldn't read the barcodes (no beam).

Important reminder: if an ACK beep or buffer is needed, the scanner must be set in the "no data loss mode"

first.

1.4.1.

Erases all codes in memory and forces the D-Fly in Real time mode. No other setting is changed.

1.4.2.

Forces the D-Fly in Real Time mode (with data acknowledgement). Erases all codes in memory. The D-Fly

should have been previously set in the "No data loss mode" ON.

1.4.3.

Forces the D-Fly in Real Time mode (without data acknowledgement). Erases all codes in memory.

The D-Fly should have been previously set in the "No data loss mode" ON.

D-Fly – Programming Guide v1.2

Enable

Data Capture

for Workforce

in Motion

- 10 -

Table of Contents