Baracoda RoadRunners Evolution-L Manual page 20

Data Capture
for Workforce
in Motion
START
Read « Set Timestamp » label
Read intermediary label
Corresponding to the next digit to set for the
Timestamp (from Appendix 1)
NO
Finished ? (1)
YES
Read « END of config » label
END
Programming procedure for "set Timestamp" option
Set Timestamp
END of configuration
Noted that the timestamp must fit the specific following format:
{YY} {MM} {DD} {HH} {MM} {SS}
The setting is made by scanning the 0-9 labels (Appendix 1) as on a calculator; following the timestamp format
shown above.
For example: to set the current time at 16th May 2007, 3.25 pm, the user will scan:
- "Set Timestamp" label,
- "0" label,
- "7" label,
- "0" label,
- "5" label,
- "1" label,
- "6" label,
- "1" label,
- "5" label,
- "2" label,
- "5" label,
- "0" label,
- "0" label,
- "end of config" label.
RoadRunners Evolution –L (1D) & -LA (Laser) – Programming Guide v1.8 - 20 -
Get user manuals: See SafeManuals.com