4. Terminal Setup
To configure the system, connect a serial cable to a COM port on a
PC or notebook computer and to RJ45 type serial (console) port of the
Industrial Managed Switch.
TSN Industrial
Managed Switch
Ring R.O. I/O
Console
115200,N,8,1
Reset
Console Port
115200,N,8,1
A terminal program is required to make the software connected to the
Industrial Managed Switch.
1. Run terminal program on the OS.
2. When the following screen appears, make sure that the COM port
should be configured as:
Baud: 115200
Parity: None
Data bits: 8
Stop bits: 1
Flow control: None
RJ45 to DB9 RS232 Cable
PC/Workstation with
Terminal Emulation Software
Serial Port
7