Table of Contents
Advertisement
4.1 Logging on to the Console
Once the terminal has been connected to the device, power on the
Industrial Managed Switch and the terminal will display "running testing
procedures".
Then, the following message asks to log in user name and password.
The factory default user name and password are shown as follows as
the login screen in Figure 4-1 appears.
Username: admin
Password: admin
The user can now enter commands to manage the Industrial Managed
Switch. For a detailed description of the commands, please refer to the
following chapters.
1. For security reason, please change and memorize
the new password after this first setup.
2. Only accept command in lowercase letter under console
Note
interface.
8
Figure 4-1: Console Login Screen
Advertisement
Table of Contents
