Hardware Monitor Page; Change Password - IBM M791 Series Manual

Hardware Monitor Page

This page sets some of the parameters for the hardware monitoring
function of this mainboard.
AMIBIOS SETUP – HARDWARE MONITOR
(C) 2000 American Megatrends, Inc. All Rights Reserved
*** System Hardware ***
CPU Vcore
Vcc2.5V
+3.3V
+5 V
+12V
VBAT
CPU Fan1
SYSTEM Fan1
CPU Temperature
SYSTEM Temperature
FANs & Voltage
These items indicate cooling fan speeds in
Measurements
RPM and the various system voltage
measurements.
System / CPU
These items display CPU and system
Temperature
temperature measurement.

Change Password

If you highlight this item and press Enter, a dialog box appears
which lets you enter a Supervisor password. You can enter no more
than six letters or numbers. Press Enter after you have typed in the
password. A second dialog box asks you to retype the password for
confirmation. Press Enter after you have retyped it correctly. The
password is then required to access the Setup Utility or for that and
at start-up, depending on the setting of the Password Check item in
Advanced Setup.
1.632 V
2.496 V
3.392 V
4.945 V
12.032V
3.472 V
ESC : Quit
1308 RPM
F1 : Help
0 RPM
32°C/91°F
F5 : Old Values (Shift)F2 : Color
39°C/102°F
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
29
↑↓←→ : Select Item
PU/PD/+/- : Modify