Table of Contents
Advertisement
Chapter 1
Introduction
This mainboard has a Socket-370 processor socket for the Intel
FCPGA Celeron, FCPGA Pentium III or VIA C3 Samuel2
processor with front-side bus speed up to 133MHz.
This mainboard integrates the VIA CLE266 Northbridge and
8235 Southbridge chipsets that support DDR 266MHz, Ultra
DMA 33/66/100/133 function and remarkably high system
performance under all types of system operations
It supports built-in USB 2.0 providing higher bandwidth. It
implements Universal Serial Bus Specification Revision 2.0 and
is compliant with UHCI 1.1 and EHCI 0.95. The mainboard
supports the built-in AC97 Codec, two 32-bit PCI slots, one CNR
(Communications and Networking Riser) slot, and an onboard
10BaseT/100BaseTX Network interface (optional). This
mainboard integrates a 128-bit 3D/2D graphics engine and a high-
performance 3D accelerator.
In addition, this mainboard has a full set of I/O ports including two
PS/2 ports for mouse and keyboard, one serial port, one VGA port,
one parallel port and maximum six USB2.0 ports– four back-panel
ports and onboard USB connector USB1 providing two extra ports
by connecting the Extended USB Module to the mainboard.
This mainboard has all the features you need to develop a powerful
multimedia workstation. The board is FLEX ATX size and has a
power connector for an ATX power supply.
Advertisement
Table of Contents
