Installing The Processor - IBM M791 Series Manual

PS/2 Mouse
PS/2 Keyboard
LPT1
COM1
VGA
LAN Port
(optional)
USB Ports
Audio Ports

Installing the Processor

This mainboard has a Socket 370 supporting the Intel FCPGA
Celeron, FCPGA Pentium III or VIA C3 Samuel2 processors.
To ensure reliability, ensure that your processor has a
heatsink/cooling fan assembly.
Do not try to install a Socket 7 processor in the Socket-370. A
Socket 7 processor such as the Pentium-MMX, or the AMD K5/K6
does not fit in the Socket 370. Do not try to install PPGA
Celeron processor in Socket-370.
Use the upper PS/2 port to connect a PS/2
pointing device.
Use the lower PS/2 port to connect a PS/2
keyboard.
Use LPT1 to connect printers or other
parallel communications devices.
Use the COM port to connect serial devices
such as mice or fax/modems. COM1 is
identified by the system as COM1.
Use the VGA port to connect VGA devices.
Connect an RJ-45 jack to the LAN port to
connect your computer to the Network.
Use the USB ports to connect USB devices.
Use the three audio ports to connect audio
devices. The first jack is for stereo Line-In
signal. The second jack is for stereo Line-
Out signal. The third jack is for
Microphone.
9