Rear View - IBM E Server x 100 Series Installation Manual

Rear view

The following illustration shows the connectors on the rear of the server.
Power-cord connector
Power supply error LED
AC power LED
Mouse connector
Keyboard connector
Serial 1 connector
Parallel connector
Video connector
USB 1 connector
USB 2 connector
Connect the power cord to this connector.
When this amber LED is lit, it indicates that a power supply error has
occurred.
When this green LED is lit, it indicates that the server is connected to an ac
power source.
Connect a mouse or other PS/2
Connect a PS/2 keyboard to this connector.
Connect a 9-pin serial device to this connector.
Connect a parallel device to this connector.
Connect a monitor to this connector.
Connect a USB device to this connector.
Connect a USB device to this connector.
®
device to this connector.
Chapter 3. Server controls, LEDs, and power
31