IBM E Server x 100 Series Installation Manual page 70

10. Turn on the computer and the monitor.
11. After the update is completed, turn off the server and monitor.
12. Remove the diskette from the diskette drive.
13. Disconnect all power cords; then, remove the server cover.
14. Return the boot block recovery jumper to pins 1 and 2.
15. Reinstall the server cover; then, reconnect all external cables and power cords
16. Turn on the server to restart the operating system.
58
xSeries 100 Type 8486: Installation Guide
Clear CMOS (JP2)
Force power on (JP8)
Boot block (JP6)
6. Remove the boot block recovery jumper from pins 1 and 2.
7. Replace any adapters that were removed; then, replace the side cover (see
"Installing the side cover" on page 25).
8. Connect the server to a power source, keyboard, monitor, and mouse.
9. Insert the BIOS update (flash) diskette into the diskette drive. You can
download a file to create this diskette from http://www.ibm.com/support/.
and turn on the peripheral devices.