Table of Contents
Advertisement
Section 4 – Inspections Before Operation
Muffler and exhaust
5
Make sure that the muffler and exhaust
▪
systems are correctly attached with no visible
damage.
Engine air intake filter
6
Make sure there are no loose or missing parts.
▪
Make sure there is no visible damage.
▪
Squeeze the lips of the vacuator valve to
▪
remove the dirt and dust.
Do an inspection of the service indicator on
▪
the air cleaner. Replace the filter element if
necessary.
238261AAA
42
6
Engine and engine pivot tray
7
WARNING
Burn hazard. Do not touch hot engine components
without the correct PPE. Let the engine cool before
you do an inspection or servicing. If you do not
obey, there is a risk of death or serious injury.
Make sure there are no loose or missing parts.
▪
Make sure there is no visible damage to the
▪
engine and engine pivot tray.
Make sure that the engine is correctly attached
▪
to the pivot tray.
Engine oil level
Use the dipstick to check the oil level.
▪
The oil level must be between the marks L
▪
(low) and H (high). Add oil if it is necessary.
Refer to the service manual for the
recommended oil type.
Visual and daily maintenance inspections
5
7
SJ40 T+, SJ45 T+
Advertisement
Table of Contents
