Nexcom NEX 812 User Manual page 47

Chapter 3: BIOS Setup
Tolerance of Temperature (For Chassis Fan 1)
Configures the tolerance of target temperature.
Critical Temperature (For Chassis Fan 1)
Configures the time that Fan Out requires for reducing its value by one step.
Critical Temp Tolerance (For Chassis Fan 1)
Configures the tolerance of critical temperature.
Fan Count Step Up and Step Down (For Chassis Fan 1)
Configures the value for fan count step up and step down.
Fan Out Step Up Time and Step Down Time (For Chassis Fan 1)
Configures the time that Fan Out requires for increasing (step up time) or
reducing (step down time) its value by one step with an interval of 0.1
second.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
USB Configuration
This section is used to configure the USB.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
USB Configuration
USB Devices:
1 Keyboard
Legacy USB Support
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
Legacy USB Support
Enable Enables Legacy USB.
Auto Disables support for Legacy when no USB devices are connected.
Disable Keeps USB devices available only for EFI applications.
33
Enables Legacy USB support.
AUTO option disables legacy
support if no USB devices are
connected. DISABLE option will
keep USB devices available
only for EFI applications.
[Enabled]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NEX 812 User Manual