SKYRC T1000 Maestro Instruction Manual
Operation
Be familiar with the key instructions and operations before starting the operation.
Connect the AC or DC power source, and T1000 powers up and enters the main interface;
1.
From the main interface, press the Start button to enter the charging settings;
2.
(To switch A/B ports, press the Port button.)
Set proper cut-off voltage, as well as the correct battery type, number of batteries, and task
3.
program. In the case of lithium batteries, balance charging is highly recommended;
Start the program after setting up.
4.
Upon completion, disconnect the battery from the charger.
Parallel Charge
The Parallel mode is available only for lithium batteries, which cannot be used for other types of
batteries.
Select the correct battery type (LiPo/LiFe/LiIon/LiHV);
1.
Choose the option of Parallel charge;
2.
Adjust the charging current (20.0-35.0A is adjustable);
3.
Start the program after setting up.
4.
Notice:
Ensure that AC and DC power is not connected simultaneously;
With the single port, charging power is 450W; with the dual ports, charging power is
intelligently distributed;
Before connecting the battery, turn on the charger;
SKYRC
T1000 Maestro
04.