Analyzer Initial Start-Up; Preparing The Analyzer For Start-Up; Installing Cation Resin Bottle - Waltron 9096 User Manual

Analyzer Initial Start-Up

4 ANALYZER INITIAL START-UP

PREPARING THE ANALYZER FOR START-UP

4.1

INSTALLING CATION RESIN BOTTLE

4.1.1
Step
1
2
3
23
Before proceeding with analyzer start-up it is absolutely
necessary to check that all procedures for a proper
installation have been followed. Please verify that all the
suggestions and recommendations have been followed.
Illustration Description
Note the date and time you are
exchanging the resin bottle.
Remove cap from new bottle of
resin.
Resin has been pre-rinsed.
Inside the cap is a gasket;
remove it from the cap.
Waltron User Manual 101-046-B.3
9096 Degassed Cation Conductivity Analyzer