Honda EU30i Manual page 58

FRONT COVER REMOVAL/
INSTALLATION
FRONT COVER ASSEMBLY
INSTALLATION:
After installing the front cover, start
the engine with the carry handle at
the stationary position, and check
that the carry handle does not rattle
during operation.
SPECIAL SCREW (6 x 12 mm) (2)
4.4 N·m (0.45 kgf·m, 3.3 lbf·ft)
CARRY HANDLE COVER
HANDLE COVER SEAL
SPECIAL SCREW (6 x 15 mm) (4)
4.4 N·m (0.45 kgf·m, 3.3 lbf·ft)
KNOB CAP
INSTALLATION:
Install the knob cap to the engine stop
switch knob.
KNOB SCREW (5 x 27.5 mm)
2.3 N·m (0.23 kgf·m,
1.7 lbf·ft)
COVER
KNOB CAP
ENGINE SWITCH KNOB
INSTALLATION:
Install the engine switch knob
as shown.
ENGINE
SWITCH
KNOB
5-3