STARTING SYSTEM
Route the starter rope (1) to the starter case (2), starter
reel (3), rope guide (4), starter grip (5), and grip cover
(6).
Tie knots at the ends of the starter rope.
Remove the band (7).
Install the grip cover to the recoil starter grip.
Check the recoil starter operation.
RECOIL STARTER INSPECTION
RECOIL STARTER OPERATION
Remove the recoil starter (page 10-2).
Check the operation of the ratchets (1) by pulling the
starter rope out several times.
STARTER PULLEY
Remove the recoil starter (page 10-2).
Check the inner side of the starter pulley (1) for
deformation and wear.
10-4
(1)
(4)
(7)
(2)
(3)
(1)
(1)
(6)
(5)
Tie
Tie