Honda EU30i Manual page 113

GENERATOR/CHARGING SYSTEM
GENERATOR REMOVAL/
INSTALLATION
REMOVAL
Remove the fan cover guide assembly (page 13-3).
STATOR COLLAR
(SHORT)
STATOR COLLAR
(LONG)
STATOR COLLAR
(SHORT)
STATOR
ROTOR
REMOVAL:
Remove the rotor using a special tool flywheel puller.
Do not remove the rotor by tapping it with a hammer.
ROTOR
STRAP WRENCH
(commercially available)
8-10
FLYWHEEL PULLER
07935-8050004
SPECIAL WOODRUFF KEY
GENERATOR WIRE HARNESS
SPECIAL NUT (14 mm)
REMOVAL:
Hold the rotor with a commercially available strap wrench
to loosen and tighten the 14 mm special nut.
TORQUE:
74 N·m (7.5 kgf·m, 54 lbf·ft)
STRAP WRENCH
(commercially available)
SOCKET BOLT
(6 x 57 mm) (4)
11 N·m (1.1 kgf·m,
8 lbf·ft)
NUT