Stairville Stage Quad LED Bundle RGB WW User Manual page 31

Sound control
'10ch' (ten channels)
n
'18ch' (eighteen channels)
n
A sound-controlled show can only be activated when the unit is operating in stand alone
mode or as master in a master / slave combination. This setting is only relevant if the device is
not controlled via DMX.
Press [Mode] repeatedly until the display shows 'SU xx' . Press [Setup]. Use [Up] and [Down] to
activate one of the available sound modes 'SO.00' ... ' SO.31' .
Press [Setup]. Now you can adjust the sensitivity for the sound control. Use [Up] and [Down] to
select a value between 0 (low sensitivity) and 31 (high sensitivity), display shows 'SU.00' ...
'SU.31' .
Operating
Stage Quad LED Bundle RGB WW
LED Lighting Set
31