Stairville Stage Quad LED Bundle RGB WW User Manual page 29

Operating mode 'Preprog‐
rammed automatic show'
Operating mode 'Slave'
A preprogrammed automatic show can only be activated when the unit is operating in stand-
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press [Mode] repeatedly until the display shows 'Pr.xx' . Press [Setup]. Now you can select one
of the preprogrammed automatic shows. Use [Up] and [Down] to select a value between
'Pr.01' and 'Pr.22' . The following table shows the available programmes.
Settings for programme 01:
For 'Pr.01' , you can choose from 14 basic colours, maximum intensity or blackout of all LEDs.
Press [Setup]. Now use [Up] and [Down] to select one of the following options: Cyan, yellow,
pink, warm white, magenta, red, orange, green, cold white, blue, pompadour, amber, light
green, light blue, all LEDs with maximum intensity, blackout
To adjust the flash frequency, press [Setup]. Use [Up] and [Down] to select a value between
'FS00' (slow) and 'FS99' (fast).
Settings for programmes 02 ... 22:
To adjust the speed of the selected auto show, press [Setup] repeatedly until the display indi‐
cates 'SPxx' . Now use [Up] and [Down] to select a value between 'SP01' (slow) and 'SP99' (fast)
or 'SPFL' (Flash effect).
To adjust the flash frequency, press [Setup] repeatedly until the display shows 'FSxx' . Use [Up]
and [Down] to select a value between 'FS00' (slow) and 'FS99' (fast).
This setting is only relevant if the device is serving as Slave in a Master / Slave configuration
and is not controlled via DMX.
Press [Mode] repeatedly until the display shows 'SLAv' and confirm with [Setup].
Operating
Stage Quad LED Bundle RGB WW
LED Lighting Set
29