Stairville Stage Quad LED Bundle RGB WW User Manual page 30

Operating
DMX mode
Stage Quad LED Bundle RGB WW
30
LED Lighting Set
This setting is only relevant when the device is controlled via DMX.
Press [Mode] until the display shows 'd.xxx' . Press [Setup].
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use [Up] and [Down] to select a value between 1 and 512 (display shows 'd.001' ... 'd.512' ).
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Mode
2-channel
4-channel
5-channel
8-channel
10-channel
18-channel
Press [Setup]. With [Up] and [Down] you can select one of the following DMX operating modes:
'2-ch' (two channels)
n
'4-ch' (four channels)
n
'5-ch' (five channels)
n
'8-ch' (eight channels)
n
Highest possible DMX address
511
509
508
505
503
495