Dryer Controls - Fisher & Paykel DE5060M Installation Instructions & User Manual

DRYER CONTROLS

Digital display screen
The digital display screen provides feedback on
how long the drying cycle has to go. If you have
programmed a 'Delay Start' (DE5060M only), the time
remaining until the cycle will start will be displayed
here, along with any messages to help you with the
overall running of your dryer (eg user warnings).
Digital display screen
Time to go
If you have selected one of the Time Dry cycles your
dryer displays approximately how many minutes the
cycle you are running has remaining. The word
is displayed on the screen for automatic cycles.
Please be aware that a number of factors can
influence the overall cycle time, eg the fabric type
and construction of garment, load size, how wet the
load is, etc.
Time to go
Progress lights
The progress lights indicate what stage of the cycle the
dryer is currently at ('Damp', 'Dry' or 'Cooling'). All
three lights are on at the beginning of the cycle. The
light for the current stage of the cycle flashes, and each
one goes out when that stage of the cycle is complete.
Progress lights
Keylock
Keylock can be used to lock the buttons on your dryer.
This will avoid accidental button presses. For more
detail please refer to the 'Drying cycle options' section.
Keylock mode
18