Dryer Controls - Fisher & Paykel DH8060P Installation Instructions & User Manual

DRYER CONTROLS

SmartTouch™ Control Dial
The SmartTouch™ Control Dial provides easy and
efficient drying cycle selection. As you rotate the dial,
the icon of the drying cycle selected will be illuminated,
SmartTouch™ Control Dial
along with the default settings for that cycle on the
right side of the control panel.
SmartTouch™ buttons
The smooth, easy clean buttons enable simple selection
of options with lights clearly showing the selections
you are making.
SmartTouch™ buttons
Digital display screen
The digital display screen provides feedback on
how long the drying cycle has to go. If you have
programmed a 'Delay Start', the time remaining until
the cycle will start will be displayed here, along with
any messages to help you with the overall running of
your dryer (eg user warnings).
Digital display screen
Time to go
Your dryer displays approximately how many minutes
the cycle you are running has remaining if you have
chosen one of the Time Dry cycles. If you have chosen
an automatic cycle (ie not 'Time Dry') the word
will appear on the screen until it reaches the cool down
phase, at which time the dryer will display how long the
cycle has left to go.
Please be aware that a number of factors can influence
Time to go
the overall cycle time, eg the fabric type of garments,
load size, the wetness of the load, environmental
conditions etc.
Progress lights
The progress lights indicate what part of the cycle the
dryer is currently on ('Dry', 'Cool' or 'End'). All three
lights are on at the beginning of the cycle. The light for
Progress lights
the current part of the cycle flashes, and each one goes
out when that part of the cycle is complete.
Keylock
Keylock can be used to lock the buttons on your dryer.
This will avoid accidental button touches. For more
detail please refer to the 'Drying cycle options' section.
Keylock mode
14