Microscope Introduction - ViTiny UM20-GN08 User Manual

1.5

Microscope introduction:

1.5.1 IR Remote Area/Indicator
When both ○
g
standby mode.
Caution: Please remove the transparent protection sheet on the IR
receiver area.
(1) IR remote control aiming area○
whenever buttons are pressed. If the indicator did not blink
means the signal was not delivered and please repress again
(2) HDMI indicator
mode. If light blinks, means microscope does not connect with
monitor.
(3) PCCam Indicator○ h : When lit up, the device is in USB mode.
and ○
LED indicator blinks, the microscope is in
h
When lit up, the microscope is in HDMI
○
：
g
○
g
The indicator will blink
f
:
23
○
f
○
h
.