(2)
MOTION: Detect the moving object, see below setting.
(2-1) SELECT: Select the detected area.
4 areas are selectable. The selected area and sequence
will change as MIRROR function is ON.
(2-2) DISPLAY: Display the selected area. Position and area can
be set in (2-1).
(2-3) SENSITIVITY: The sensitivity to detect whenever object
moves. The lower value gets the higher sensitivity.
(2-4) COLOR: The Area frame color: Green, Blue, White and
Red.
(2-5) TRNAS: The Area frame transparency.
(2-6) ALARM: Setup Detected Area's display content.
17