If light blinks, means microscope is not connected to a PC
1.5.2 Power/USB/HDMI port
Caution: Please hold the cable when remove from microscope
and do not disassemble cables forcefully.
(1) Power○
:
i
the box. Please do not use other adaptor.
:USB port for PC connection or Firmware update.
(2) USB
○
j
(3) HDMI○
:
K
screen. When the device is in HDMI mode, connect the
microscope to the screen using the HDMI cable from the box.
* For TV screen connections, make sure to choose the
homologous image ratio and format.
Power adaptor is only compatible with the cord in
The HDMI port is used to connect the microscope to a
○
○
k
j
24
○
i