Table of Contents
Advertisement
(4-2-1) POZ/SIZE: Choose the compensation area.
(4-2-2) START: Start to do Static Dead Pixel correction.
(4-2-3) DPC VIEW: Show corrected Dead Pixels.
(4-2-4) LEVEL: Set the threshold value to judge if it needs
(4-2-5) AGC: Auto Gain Control. When light source is not
(4-2-6) SENS-UP: Raise up the sensor's sensitivity to
(4-2-7) RETURN: Return to last page or Save & End Menu.
(5) FIRMWARM: Firmware version.
(6) RETURN: Return to last page or Save & End Menu.
1.4.6 ADJUST
to be corrected.
enough, AGC will follow the threshold setting to
adjust brightness and compensate the dead pixel.
compensate the dead pixel.
20
Advertisement
Table of Contents
