HMS Networks Anybus Wireless Bolt LTE Startup Manual page 8

®
Anybus Wireless Bolt LTE
3.4. SIM Card
Prepaid Data Plan
If a prepaid data plan is used, ensure that:
• the data amount is sufficient
• that any SMS notifications are sent to a monitored number
3.5. Network Operator Certified Firmware
You may need to install a firmware certified for the operator you are going to use, it is not
possible to connect the Bolt LTE to the operator network otherwise.
Before you start to configure the Bolt LTE settings:
• Ensure that the current firmware installed on the Bolt LTE is valid for the network
operator you are going to use.
• You find the firmware version number in the Bolt LTE built-in web interface Overview
page. See Bolt LTE Built-In Web Interface (page
• If you need to install a firmware version certified for your network operator:
Download the firmware update file, specific for your network operator, from
www.anybus.com/support.
• For information on how to update the firmware, see the Bolt LTE User Manual.
3.6. Firewall and Routing
There are routing options set for the system.
By default, the firewall allow routing of:
• Outgoing traffic for TCP, UDP and ICMP (for IPv4 only).
• Incoming traffic for already established connections only.
For other possible configurations, see the Bolt LTE User Manual.
Page 6 of 28
™
19).
SIM Card
SP2868 Version 1.2