Table of Contents
Advertisement
Required IP Address Settings
5.2. Required IP Address Settings
To be able to access the Bolt LTE built-in web interface you may need to adjust the IP
settings, choose one of the following methods.
NOTE
The Bolt LTE default IP address is 192.168.0.98 and the subnet mask is
255.255.255.0.
Option 1 - Enable DHCP on Your PC
When DHCP is enabled on the PC accessing the Bolt LTE, you do not need to change the IP
address settings for the Bolt LTE to be able to access the Bolt LTE built-in web interface.
Option 2 - Set a Static IP Address on Your PC
On the PC accessing the Bolt LTE built-in web interface, set a static IP address within the
same IP address range as the Bolt LTE IP address.
NOTE
When you change to a static IP address on your PC, internet access is lost.
SP2868 Version 1.2
®
Anybus
Wireless Bolt LTE
Page 17 of 28
™
Advertisement
Table of Contents
Related Manuals for HMS Networks Anybus Wireless Bolt LTE
Related Products for HMS Networks Anybus Wireless Bolt LTE
- HMS Networks Anybus Communicator ABC4021
- HMS Networks Anybus Wireless Bridge II CAN AWB3006
- HMS Networks Anybus Wireless Bridge II Serial AWB3015-B
- HMS Networks Anybus North ABC3213-A
- HMS Networks Anybus Communicator ABC3261-A
- HMS Networks Anybus Wireless Bolt Serial AWB2010-B
- HMS Networks Anybus Wireless Bolt LTE AWB1502-B
- HMS Networks AWB6000-A
Need help?
Do you have a question about the Anybus Wireless Bolt LTE and is the answer not in the manual?
Questions and answers