Advertisement
Warranty Information
Proof of purchase will be required.
The guarantee does not cover faults or damage caused by
incorrect installation and/or maintenance, ordinary wear and
tear, water composition, etc.
*Please see www.methven.com for full terms and conditions of warranty
Cleaning
Your product has a high-quality finish and should be treated
with care to preserve the visible surfaces. Never use abrasives
or abrasive cleaning agents to clean this product clean regularly
with contamination free warm water and a damp soft cloth. Do
not use products containing chlorine bleach or hydrochloric
acid as these can damage the product.
We have a policy of continuous improvement and reserve the right to change
specifications without notice.
METHVEN UK LIMITED
METHVEN EXPERIENCE CENTRE
3/3A STONE CROSS COURT
YEW TREE WAY
GOLBORNE
WARRINGTON
WA3 3JD
UNITED KINGDOM
INST-EKIT06/KR-V1
TEL: 0800 195 1602
FAX: 0844 406 8690
EMAIL: sales@uk.methven.com
www.methven.com
KIRI MK2 CHROME EASY FIT SHOWER
EKIT09/KR
Installation Guide
Technical Specification
Operating Pressure
Min:
0.35 Bar
5.0 Bar
Max:
Operating Temperature
Hot:
65⁰C
Cold:
5⁰C
Inlet Connections
1/2" BSP
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for METHVEN KIRI MK2
Summary of Contents for METHVEN KIRI MK2
- Page 1 The guarantee does not cover faults or damage caused by EKIT09/KR incorrect installation and/or maintenance, ordinary wear and Installation Guide tear, water composition, etc. *Please see www.methven.com for full terms and conditions of warranty Technical Specification Cleaning Operating Pressure Your product has a high-quality finish and should be treated Min: 0.35 Bar...
- Page 2 General height of 550mm. In certain situations, Methven recommends this product the hole may need to be further away to is installed by a competent person in a maximum of 615mm. Place wall plugs compliance with all relevant regional into hole and push firmly into place.
Need help?
Do you have a question about the KIRI MK2 and is the answer not in the manual?
Questions and answers