METHVEN Wai Installation Instructions & Maintenance Manual

Step 5
• Remove the cover from the handset
mounting bracket.
• Position the handset mounting bracket
where required and secure in place using
the screws.
• Ensure a waterproof seal is achieved
between the bracket and mounting
surface.
• Refit the cover onto the handset
mounting bracket.
Note: When selecting the position of the
handset mounting bracket, ensure that
shower hose is not stretched or subjected
to tight bends.
Care and Cleaning:
Never use abrasives or abrasive cleaning agents to clean this product. Clean regularly with
contamination free warm soapy water and a damp soft cloth.
Methven warrants this product against manufacturing defects and that it is suitable for
use under the general operating conditions specified in this instruction sheet. However,
regional regulations apply and may affect your warranty. Please refer to www.methven.com
or call customer service for full details.
METHVEN UK LIMITED METHVEN EXPERIENCE
CENTRE 3/3A STONE CROSS COURT YEW TREE
WAY
GOLBORNE
WARRINGTON
WA3 3JD
UNITED KINGDOM
WAIBFCPUK/WAIBSMCPUK,
v1 - 21.02.2020
TEL: 0800 195 1602
FAX: +44 (0) 8444 068 690
E: sales@uk.methven.com
methven.com
Wai bath filler and bath shower mixer
Installation Instructions
& Maintenance Guide
WAIBFCPUK / WAIBSMCPUK
Technical Specifications:
Operating Pressure:
Min: 50kPa/0.5bar
Max: 1000kPa/10bar*
Optimum: 150kPa/1.5bar - 500kPa/5bar
Operating Temperature:
Hot: Max 70°C*
Cold: Min 5°C
Inlet Connections:
All ¾" BSP
• 20 Year Warranty on Chrome Version
* Regional specific regulations apply. Please
refer to your warranty
statement at www.methven.com