METHVEN Ovalo 01-0646 Installation Manual

Technical Specifications
Inlet Connections: All 1/2" BSP
Operating Pressure: 150kPa - 500kPa
Operating Temperatures: Recommended hot water supply 50°C,
maximum 70°C. AS 3500 requires all hot
water supplies to any sanitary fitting to be
tempered to 50°C.
Hot Spindle as Assembled
Red Washer
Hot Handle
04-9905
Spout Push Fit Adaptor
Hot 04-9752
Cold 04-9769
Grub Screws
Spout
AUG 2010
Methven Australia Pty Ltd
ABN 15 104 813 390
We recommend that this product is installed by a licensed plumber.
Melbourne, Australia
www.methven.com
Cold Spindle as Assembled
(blue washer)
Breech Set
(Not Included)
Headworks
O Ring Seal
Locking Nut
Flange
Cold Handle
MA433508
Installation Ovalo 3 Hole Wall Set
(Breech not included)
Basin 01-0646
Bath 01-0653
Illustration may not reflect actual product shape.
Installation Guide
IMPORTANT
Please read all of the instructions before installation
Use of this product in non-domestic applications voids warranty.
All pipe work must be thoroughly flushed prior to the installation of the mixer.
NEFA inline filters must be installed on both hot and cold supplies.
THE METHVEN GUARANTEE
The warranty statement shall apply to all tapware & showers supplied by Methven
www.methven.com
For more information visit www.methven.com
THIS WARRANTY ISSUED BY: Methven Australia Pty Ltd, Melbourne Australia
SPEC 001
Does not apply to Bath Sets