Advertisement
"In situ" testing
The maximum working pressure of the ceramic cartridge is 1000kPa. Do not
hydrostatic test the installation with this mixer installed. Damage to the ceramic
cartridge may occur, voiding our warranty.
May 2016
Methven Australia Pty Ltd
ABN 15 104 813 390
Melbourne, Australia
www.methven.com
Kiri Brass Plate Mount Mixer
IMPORTANT
Please read all of the instructions before installation
Use of this product in non-domestic applications voids warranty.
All pipe work must be thoroughly flushed prior to the installation of the mixer.
NEFA inline filters must be installed on both hot and cold supplies.
Do not remove the ceramic cartridge from the mixer when installing.
Damage caused by hydrostatic testing is not covered by our warranty.
MA015092A IssueB
BATH 01-5436
Kiri
BASIN 01-5092
Illustration may not reflect actual product shape.
Installation Guide
www.methven.com
SPEC 001
Applies to basin
mixers only
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for METHVEN Kiri 01-5436
Summary of Contents for METHVEN Kiri 01-5436
- Page 1 Do not remove the ceramic cartridge from the mixer when installing. Damage caused by hydrostatic testing is not covered by our warranty. Applies to basin May 2016 MA015092A IssueB mixers only Methven Australia Pty Ltd ABN 15 104 813 390 www.methven.com Melbourne, Australia www.methven.com...
- Page 2 Tighten with Allen key. D. Assemble ‘O’ ring, flange and handle. THE METHVEN GUARANTEE The warranty statement shall apply to all tapware & showers supplied by Methven We recommend that this product is installed by a licensed plumber. For more information visit www.methven.com...
Need help?
Do you have a question about the Kiri 01-5436 and is the answer not in the manual?
Questions and answers