Network Connectivity; Chaining - Stanley EX5200 Deployment Manual

The Exciter can store messages on the Tag for subsequent transmission. The
stored messages can subsequently be triggered by other Exciters, enabling
sophisticated process control functions.
The Exciter can trigger a Tag to:
Transmit up to 15 bytes of data sent to it by the Exciter
•
Transmit one of 15 pre-stored (customer-created) messages
•
Store up to 15 bytes of data sent to it by the Exciter
•

Network Connectivity

When connected to the network, the Exciter can be remotely programmed,
monitored, and its firmware can be updated via the AeroScout Engine. The
Exciter can also work in an offline mode, thus eliminating the need for a
physical network connection. In the offline mode, however, remote
configuration and monitoring is not available.

Chaining

In an area where the required low frequency (LF) coverage exceeds the capacity
of one Exciter, the Exciter can be chained to another Exciter for complete and
precise coverage.
EX5200 Exciter Deployment Guide
8