Stanley EX5200 Deployment Manual page 24

Figure 16: Screwing the Mounting Adapter to the Spacers of the Mounting Clip
7.
Attach the Controller to the Mounting Adapter by aligning the clips on
the back of the Controller casing with the four brackets on the adapter.
8.
Slide the Controller to the right and clip into place.
Figure 17: Attaching the Controller to the Mounting Adapter
9.
To detach the Controller from the Mounting Adapter, press the release
button on the left side of the adapter and slide the Controller to the left.
EX5200 Exciter Deployment Guide
24