Stanley EX5200 Deployment Manual page 17

4.
The Termination Switch of the Master Exciter and the last Slave Exciter in
the chain must be set to On (o-o).
On the other Slave Exciters, it must be set to Off (-o o-).
5.
The Master/Slave configuration is set via System Manager.
Slave Exciters inherit the Master Exciter ID and LF configuration, as well as
from the transmission range.
6.
Each slave must be connected directly to the network and the following
parameters configured before being connected to the MASTER:
•
Transmission Range
Exciter is Slave
•
Exciter is disconnected from network
EX5200 Exciter Deployment Guide
17