universalblue Campana T 60 Instruction Manual page 28

If you have an outlet, your cooker hood can be connected as below
picture using an extraction duct (enamel, aluminum, flexible pipe or
non-flammable material with an interior diameter of 150mm).
 Before installation, turn the unit off and unplug it from the
outlet.
 The cooker hood should be placed at a distance of 65~75cm
above the cooking surface for best effect..
 Use 2 pcs 4mm x 30mm screws to hang the hood. And use 2
pcs 4mm x 40mm screws to fix inside chimney bracket.
 Use 2 pcs 4mmx8mm screws to fix the valve on the top of
the hood, attach the expansion pipe (not included) on the way
wall valve as shown below. Fix the expansion pipe on the
valve by cable tie.
inside chimney bracket
4mm x 30mm screws
28