ADDER ADDERLink INFINITY 101T-DVI User Manual page 18

AIM Manager
System Messages
Enable AIM Control
Click this button to allow an AIM (Adder Infinity Manager) box to take control of this TX. When the button is
clicked, the ALIF101T unit will be rebooted to allow the AIM box to discover and control it.
Enable system messages
Tick to allow the creation of status and error messages by ALIF101T unit.
Send system messages to remote Log Server
Choose this option to send the system messages to a remote server via the network. Provide the IP address of
a suitable server here also.
ADDERLink INFINITY servers use the User Datagram Protocol (UDP) for all Syslog traffic.
Store system messages in unit
When ticked, this option will store system messages within the memory of ALIF101T unit. Click the View
messages button to view the list or the Clear messages button to delete the list.
Update Now
Click to save and implement any changes that you make.
To get here
1 Connect your computer to the network port on the front panel.
2 Run a web browser and enter the IP address of the unit. If the address is
unknown, perform a manual factory reset to http://169.254.1.33
3 Click either the AIM Manager or System Messages links, as appropriate.
17