Safety ����������������������������������������������������������������� 9 15.3 Temperature Increase; General Safety Instructions ���������������������������������������������9 15.4 Application Areas; Instructions, Standards And Regulations; Appliance Description - STIEBEL ELTRON EIL 3 Trend Manual For Operation And Installation

INSTaLLaTION
Safety
INSTaLLaTION
7. Safety
Only a qualified contractor should carry out installation, commis-
sioning, maintenance and repair of the appliance.
7.1 General safety instructions
We guarantee trouble-free function and operational reliability only
if original accessories and spare parts intended for the appliance
are used.
Material losses
!
Observe the max. permissible inlet temperature. Higher
temperatures may damage the appliance. You can limit
the inlet temperature by installing a central thermostatic
valve.
Material losses
!
Only operate the appliance with non-pressurised taps.
www.stiebel-eltron.com
7.2

Instructions, standards and regulations

Note
Observe all applicable national and regional regulations
and instructions.
The specific electrical resistance of the water used must not fall
below that stated on the type plate. In a linked water network,
factor in the lowest electrical resistance of the water (see chapter
"Specification / Data table"). Your water supply utility will advise
you of the electrical resistivity or conductivity of the water in your
area.
8.

Appliance description

8.1 Standard delivery
The following are delivered with the appliance:
- Sieve inside the cold water inlet
- Special aerator
- Company logo for oversink installation
EIL Trend | 9