Safety ����������������������������������������������������������������� 9 15.2 Wiring Diagram; General Safety Instructions ���������������������������������������������9 15.3 Temperature Increase; Instructions, Standards And Regulations; Appliance Description - STIEBEL ELTRON EIL 3 Premium Operation And Installation

INSTaLLaTION
Safety
INSTaLLaTION
7. Safety
Only a qualified contractor should carry out installation, commis-
sioning, maintenance and repair of the appliance.
7.1 General safety instructions
We guarantee trouble-free function and operational reliability only
if original accessories and spare parts intended for the appliance
are used.
Material losses
!
Observe the max. permissible inlet temperature. Higher
temperatures may damage the appliance. You can limit
the inlet temperature by installing a central thermostatic
valve.
WARNING Electrocution
This appliance contains capacitors which are discharged
when disconnected from the power supply. The capacitor
discharge voltage may briefly reach > 34 V DC.
www.stiebel-eltron.com
7.2

Instructions, standards and regulations

Note
Observe all applicable national and regional regulations
and instructions.
The specific electrical resistance of the water used must not fall
below that stated on the type plate. In a linked water network,
factor in the lowest electrical resistance of the water (see chapter
"Specification / Data table"). Your water supply utility will advise
you of the electrical resistivity or conductivity of the water in your
area.
8.

Appliance description

8.1

Standard delivery

The following are delivered with the appliance:
- Sieve inside the cold water inlet
- Special aerator
- Connection hose 3/8, 500 mm long, with gaskets*
- Tee 3/8*
- Company logo for oversink installation
*for the connection as pressure-tested appliance
EIL Premium | 9