Display Menu; Display Process Values; Chart; Manual Step - Waltron 3041 User Manual

User Interface

DISPLAY MENU

5.6

DISPLAY PROCESS VALUES

5.6.1
The following is a list of the data displayed in this menu (read-only values):

Sensor : shows the current measurement of the sensor

Refer.: shows the reference value (first point for the absorbance calculation)

Reading: shows the reading of the sensor (second point for absorbance calculation)

Absorb.: displays the last absorbance value calculated

Blank : shows the most recent blank value

Led: shows the led supplied

Valid. %: it shows the validation value in %, compared to the calibration value

Current operation: this window displays the current analysis step and the time in
progress (countdown for every step programmed)

CHART

5.6.2
It displays in a graphic the sensor's signal trend during the current analysis cycle.

MANUAL STEP

5.6.3
This button allows to access to the manual commands of each programming step (see list in
Section 2.4.1) individually. The operator can determine which single operation to run (select
function) and the elapsed time for the operation in seconds.
This function is available only when the analyzer is in stand-by mode.
35

Figure 5.4: User interface in the DISPLAY Menu.

Waltron User Manual 101-016-B.3
3041 Silica Analyzer