Table of Contents
Advertisement
Quick Links
This is the user guide for the evaluation module (EVM) of the TUSB522P. The purpose of this user guide
is to facilitate an easy evaluation process of the TUSB522P USB 3.1 SuperSpeed (5 Gbps) Re-Driver.
The contents of this user's guide are meant to provide an overview of the TUSB522P, including the key
features, operating conditions, and how to setup this EVM for use in a system level evaluation.
The construction of the TUSB522P EVM also serves as a reference design that can be easily modified for
any intended application. Target applications include cell phones, computers, docking stations, TVs, and
active cables. Schematic and layout information is included at the end of this manual.
...................................................................................................................
1
2
2.1
2.2
2.3
3
3.1
3.2
4
1
2
3
4
5
6
7
8
1
2
3
4
5
All trademarks are the property of their respective owners.
SLLU244 - August 2016
Submit Documentation Feedback
............................................................................................
.........................................................................................
....................................................................................
....................................................................................
............................................................................................................
...................................................................................
.......................................................................................................
..............................................................................................................
.................................................................................................
................................................................................................
...............................................................................................
............................................................................................
................................................................................
.................................................................................
......................................................................................
..................................................................................................
.............................................................................................................
Copyright © 2016, Texas Instruments Incorporated
Contents
.............................................................................
List of Figures
...................................................................
...............................................................
.....................................................................
List of Tables
User's Guide
SLLU244 - August 2016
TUSB522P EVM
TUSB522P EVM
2
3
3
5
5
6
6
8
12
2
3
6
7
8
9
10
11
4
5
5
5
12
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Texas Instruments TUSB522P
Summary of Contents for Texas Instruments TUSB522P
-
Page 1: Table Of Contents
SLLU244 – August 2016 TUSB522P EVM This is the user guide for the evaluation module (EVM) of the TUSB522P. The purpose of this user guide is to facilitate an easy evaluation process of the TUSB522P USB 3.1 SuperSpeed (5 Gbps) Re-Driver. -
Page 2: Introduction
Introduction The TUSB522P is a dual channel, USB 3.1 SuperSpeed re-driver and signal conditioner supporting data rates of 5.0 Gbps. The device complies with USB 3.1 spec revision 1.0, supporting electrical idle condition and low frequency periodic signals (LFPS) for USB 3.1 power management modes. -
Page 3: Tusb522P Evm Configuration
Description of EVM Board The TUSB522P EVM is designed to provide easy evaluation of the TUSB522P device. It is also meant to serve as a reference design to show a practical example of how to use the device in a mass-production system. -
Page 4: Jumper / Switch Description And Settings
1-2 = 1K to GND NC = Internal Pull-up (Default) VCC 3.3V 1-2 = VCC_3.3V Provided from U2 (Default) NC = Provide external 3.3 V on Pin 2 TUSB522P EVM SLLU244 – August 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 5: Tusb522P Configuration Pins
–8.3 Monitoring the Device Current The TUSB522P EVM includes the option of monitoring the current draw of the device. In order to enable this feature, the following steps must be taken: 1. Un-install the shunt located at JMP11 and remove R26. -
Page 6: Pcb Construction
0 Ohm LP5907 LED Green 0805 Silkscreen: 3.3V VREG Copyright © 2016, Texas Instruments Incorporated Figure 3. TUSB522P EVM Schematic (High Speed Pins / Power) TUSB522P EVM SLLU244 – August 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 7: Tusb522P Evm Schematic (Device Control Pins)
HDR2X1 M .1 Silkscreen: .22uF Silkscreen: SLP_S0# Silkscreen: RESET Switch - Push Button Copyright © 2016, Texas Instruments Incorporated Figure 4. TUSB522P EVM Schematic (Device Control Pins) SLLU244 – August 2016 TUSB522P EVM Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 8: Evm Layout Layer 1 (Top)
This EVM was designed to show the implementation on a 4-layer board. Figure 5 through Figure 8 display the EVM PCB board layout. Figure 5. EVM Layout Layer 1 (Top) TUSB522P EVM SLLU244 – August 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 9: Evm Layout Layer 2 (Gnd)
PCB Construction www.ti.com Figure 6. EVM Layout Layer 2 (GND) SLLU244 – August 2016 TUSB522P EVM Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 10: Evm Layout Layer 3 (Vcc)
PCB Construction www.ti.com Figure 7. EVM Layout Layer 3 (VCC) TUSB522P EVM SLLU244 – August 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 11: Evm Layout Layer 4 (Bottom)
PCB Construction www.ti.com Figure 8. EVM Layout Layer 4 (Bottom) SLLU244 – August 2016 TUSB522P EVM Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 12: Tusb522P Evm Board Layout 4 Evm Material Listing
EVM Material Listing www.ti.com EVM Material Listing Table 5 is the complete BOM for the TUSB522P EVM. Table 5. Bill of Materials Item Reference Part C1,C2,C3,C4,C11,C12 0.1uF C5,C6 10uF C7,C8,C9,C10 C13,C14 0.01uF 22uF .22uF LED Green 0805 J1,J2,J3,J4,J5,J6,J7,J8 HDR3X2 .1X.1 J9,J10,J11 HDR2X1 M .1... - Page 13 STANDARD TERMS AND CONDITIONS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, or documentation (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms and conditions set forth herein. Acceptance of the EVM is expressly subject to the following terms and conditions.
- Page 14 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 15 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧くださ い。http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page SPACER EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS.
- Page 16 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2015, Texas Instruments Incorporated...
- Page 17 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue.
- Page 18 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments TUSB522PEVM...
Need help?
Do you have a question about the TUSB522P and is the answer not in the manual?
Questions and answers